Building Insulation--Loose Fill Articles
Brought to you by
Knauf Insulation
Featured Articles
- Dull the Din
- REMODELING Magazine (1/1/2007)
- Advanced building materials help buffer homes' distracting noises.
- ebuild Guide to Building Insulation Specifications
- ebuild (12/18/2006)
- A highly-insulated house was once a hallmark of high-end construction, but now every house must be carefully insulated to minimize heating and cooling costs. Upgrading insulation beyond the minimum standards increases comfort, reduces heating and air conditioning costs, and enables the use of smaller, less expensive furnaces, cooling equipment, and duct work.
- Owens Corning Insulation
- (12/11/2006)
- Johns Manville Insulation Products
- (12/11/2006)
- Insulation, Housewrap and more
- (12/11/2006)
- Siding, Insulation and More
- (12/11/2006)
- Fiberglass Insulation
- (12/7/2006)
- Surface Treatments
- REMODELING Magazine (12/1/2006)
- Remodeling Magazine staff picks the latest products. Made from naturally mold-resistant inorganic fiberglass, the Spider Custom Insulation System is a formaldehyde-free, spray-in insulation that completely fills wall cavities, eliminating gaps and voids where energy can escape. Spider's thermal performance reaches R-values of R-15 in a 2x4 wall cavity and R-23 in a 2x6 wall cavity. The material sprays in practically dry, with a lower moisture content than dry wood, and dries completely in two to six hours, allowing drywall to be put up the same day.
-
 Custom Insulation.jpg)
Johns Manville to Introduce Overhead Application for Spider Custom Insulation System at 2006 Pacific Coast Builders Conference
- ebuild (10/23/2006)
- Johns Manville (JM), the only manufacturer to offer a complete line of Formaldehyde-free fiber glass building insulation, will introduce an overhead application for its Spider Custom Insulation System at the 2006 Pacific Coast Builders Conference (PCBC) taking place in San Francisco, June 20-23. Overhead Spider provides high R-values and complete cavity coverage for superior energy efficiency in hard-to-reach cathedral ceilings and flat roof cavities.
-
Knauf introduces Perimeter Plus Blow-in-Blanket System
- ebuild (10/23/2006)
- Knauf Insulation announces the introduction of Perimeter Plus, a high-quality blowing insulation specifically designed for use with the Blow-in-Blanket System (BIBS). Blowing Perimeter Plus into closed cavities behind Perimeter Plus netting provides complete, consistent coverage with high R-value performance. Knauf Insulation's Perimeter Plus Blow-In-Blanket System offers the highest R-value possible, delivering up to an R-15 in 2x 4 construction and an R-23 in 2 x 6 construction.
Subscribe to ebuild articles. Bring ebuild to you.
