ebuild: The professional's guide to building products
Sign Up for Newsletter Email this to a friend

Marketplace

For Manufacturers

Browse Articles

Plastic & Composite Moldings Articles

Featured Articles

  • Kleer Lumber Expands Mouldings Line
  • (6/1/2008)
  • Kleer Lumber, LLC, an industry-leading manufacturer of extruded free foam cellular PVC building products, proudly expands its line of mouldings for both interior and exterior applications.
  • Allure Extruded Moldings
  • BUILDER Magazine (1/7/2008)
  • Allure Collection extruded moldings are designed to complement the manufacturer's existing line of products. Made from a PVC material that won
  • "T" MouldingVERSATEX Enhances Beaded Panel Installation with New "T" Moulding Profile
  • ebuild (10/9/2007)
  • VERSATEX introduces a time-saving moulding piece for joining long runs of all beaded profiles, especially their popular 4" x 8" and 4" x 10" Beaded Panels. It also leaves a cleaner, more architecturally-pleasing appearance. The new "T" moulding will be 5/8"x 3", with a 1/2" cutout on each edge, leaving a receiver and cover for the normally exposed 4" edges of joining panels.
  • VersatexVersatex Introduces 16 New Moulding Profiles with Super-Smooth Surfaces
  • ebuild (10/3/2007)
  • Versatex has developed a new Cellular PVC molding line that takes the promise of low maintenance and high performance to another level with a "ready-to-install" surface. All the pieces of this 16-profile offering are extruded, not cut, for a finish that requires paint only when a custom color is desired. The new moulding series has 5 Crown Moulding Profiles, 4 Casing Profiles, 4 Cove Profiles, and 4 Utility Profiles--covering most of the moulding applications for everything from historic preservation to contemporary architecture.
  • Envelop Surround SystemRoyal Mouldings Debuts Window Envelop Surround Systems
  • ebuild (10/1/2007)
  • Professional solutions to conventional windows can now easily be achieved using Royal Mouldings new No Rot Window Envelop Surround Systems. These new pediment and profile accessories are made of 100 percent Cellular Vinyl PVC and are now available from various Royal Mouldings sources.
  • Interior Products Review: Molding
  • BUILDING PRODUCTS Magazine (8/9/2007)
  • In the mid-Atlantic region where Kevin Wales installs interior molding, production builders have been skipping the trim around windows and even doorways for the past few years. That's keeping Wales, president of Just Moulding in Gaithersburg, Md., pretty busy with remodeling clients.
  • Quick Clip Molding Installation System
  • BUILDING PRODUCTS Magazine (5/10/2007)
  • Focal Point. The Quick Clip system, designed to make crown molding installation fast and easy, installs along the header board of a wall, eliminating the need to locate studs. Top and bottom grooves on compatible polyurethane moldings snap into place on the Quick Clips, so there are no fastener holes to patch. Quick Clips-compatible moldings come in two sizes--4-1/8 inch and 5-7/8 inch--in eight patterns. 800-662-5550.
  • Trimming a room with moulding is a simple and affordable.LP Makes Moulding Installation Easy, Affordable
  • ebuild (4/30/2007)
  • LP Moulding products are an affordable alternative to wood -- with all of wood's beauty and none of the disadvantages like sanding, priming or sealing. And, it offers consistency in manufacturing which simply cannot be found with wood products. With a little planning, a few tools and some quick calculations, they can dramatically change the look and feel of a room in a single afternoon without making too much of a mess.
  • LP offers eight colors and more than a dozen profiles.LP Moulding Saves Time and Money
  • ebuild (4/30/2007)
  • LP® Moulding saves time, which translates into saved money primarily through reduced labor costs and increased productivity. The polystyrene substrate makes LP Moulding suitable for damp areas such as bathrooms, laundry rooms or kitchens. It is pre-finished and ready to install in a variety of finishes from white to multiple wood grains to match any style of home. In fact, LP offers eight colors and more than a dozen profiles. Bostian said, "If other colors are preferred, LP Moulding can be painted with premium latex paint. Nail holes and minor surface blemishes can be filled with putty, caulk or spackling."

rss icon

Subscribe to ebuild articles. Bring ebuild to you.