Vents, Soffit Articles
Brought to you by
Featured Articles
Showing 1 - 5
of 5 Articles
- Tri-Vent Rolled Vent
- REMODELING Magazine (11/18/2009)
- New Tri-Vent Rolled vent helps solve three ventilation challenges: off-peak exhaust, lower intake, and shed (clerestory) applications. The material also work on flat or barrel-tile roof applications for lower eave intake. Tri-Vent 20-foot roll offers installation and labor savings by unrolling quickly for easy installation, the maker says. 800.438.2920.
- Soffit System
- BUILDING PRODUCTS Magazine (1/18/2009)
- The 4-inch-wide Soffit System, created in partnership with Intex Millwork, is safer to carry up a ladder and easy for an individual to install, the company says. It has tongue-and-groove edges and is available in vented and non-vented configurations. Three sizes are available. 800-330-2239.
In-Vent Rooftop Intake- REPLACEMENT CONTRACTOR Magazine (2/24/2008)
- In-Vent is a rooftop intake vent that lets in fresh air when traditional soffit vents cannot be used. Ideal for roofers and remodelers who need to add intake ventilation to balance ridge vents but can't access the soffits or overhangs. Available in 4-foot pieces, it gives 7 inches of unobstructed vent area per linear foot. 800.837.8368.
- Soffit Vents
- (12/11/2006)
- Roofing
- (12/11/2006)
Showing 1 - 5
of 5 Articles
Subscribe to ebuild articles. Bring ebuild to you.
