ebuild: The professional's guide to building products
Sign Up for NewsletterEmail this to a friend

Marketplace

For Manufacturers

Browse Articles

Beadboard Articles

Featured Articles

  • Versatex Enhances Beaded Panel Installation with New T Moulding Profile
  • (2/25/2009)
  • Versatex introduces a time-saving moulding piece for joining long runs of all beaded profiles, especially their popular 4' x 8' and 4' x 10' Beaded Panels. It also leaves a cleaner, more architecturally-pleasing appearance. The new 'T' moulding will be 5/8'x 3' with a 1/2' cutout on each edge, leaving a receiver and cover for the normally exposed 4' edges of joining panels.
  • Beaded Weatherboard
  • BUILDER Magazine (1/7/2008)
  • Reproduced from classic weatherboard designs, beaded weatherboard features a wide clapboard face highlighted by a distinctive bead at the base of the panel. Made of PVC, the siding features a historically correct 7/16-inch profile in a 6 1/2-inch exposure. Backed by a lifetime warranty, the low-maintenance siding looks like natural cedar but resists insects and moisture and won't rot or warp, the maker says. 866-393-8883.
  • New PVC Stealth Bead BoardVersatex Finds New Ways to Hide Nails in New PVC Stealth Bead Board
  • ebuild (12/18/2007)
  • Versatex introduces the new low-maintenance PVC Stealth Bead Board, with an extended nailing flange to allow for a true hidden fastening system for porch ceilings and high, hard-to-reach soffit areas. The new plank is a tongue and groove design with a kicker. Instead of having to nail through a typical small tongue as in traditional beaded T and G products, the installer now has a wider 1/2" surface to nail through.
  • PVC Stealth Skirt Board New Versatex PVC Stealth Skirt Board is a Smart Start to Any Siding Job
  • ebuild (12/18/2007)
  • Versatex introduces the new PVC Stealth Skirt Board--a multi-purpose frieze board or starter strip that is engineered to receive all types of sidings and stand up to nasty weather at the same time. The new 5/4" thick plank features an angled top ridge for the first course of fiber cement or composite siding to rest upon. This tapered edge also allows water to run off.
  • Kerfkore BeadboardThe Kerfkore Company Offers Greater Flexability and Custom Solutions with its Beadboard
  • ebuild (8/16/2007)
  • The Kerfkore Company, a manufacturer of patented bendable substrates and panel products, now offers far greater flexibility and custom solutions with its fast-growing beadboard line. High-quality beadboard panels from The Kerfkore Company are available in a nominal 4"x 8" size with 1 1/2" standard groove spacing and a choice of 1/8", 3/16", or 1/4" thickness.
  • Azek Architectural BeadboardArchitectural Beadboard Provides Classic Look of Wainscat
  • ebuild (10/19/2006)
  • AZEK Architectural Beadboard offers the authentic wainscot looks homeowners crave. In a new and workable 5/8" x 4" profile, AZEK replicates the distinctive architectural look of traditional wooden beadboard. Available in 18 ft. lengths, it's thicker, with more surface area for gluing and installs very easily at 16-inches on center. AZEK Beadboard is also available in /2'' x 6'' x 18'.

rss icon

Subscribe to ebuild articles. Bring ebuild to you.