Drills Articles
Brought to you by
Featured Articles
- Products: Tools
- REPLACEMENT CONTRACTOR Magazine (11/1/2006)
- Replacement Contractor staff picks the best new tools. Hilti. The TE 7-C Rotary Hammer Drill delivers high-impact power for effective chiseling and drilling. The ergonomic design and low vibration make for lighter work and less fatigue. A slip clutch makes it possible to drill with core bits up to 2 inches in diameter, and also stays more consistent throughout the life of the tool. Three modes of operation include rotation only, rotation with hammer, and hammer only. The tool is compatible with the TE DRS-M self-contained dust removal system. (more)
-
IRWIN Launches its Fastest Wood Drill Bit EVER
- ebuild (10/19/2006)
- The unique design of IRWIN's SPEEDBOR "MAX" Wood Drilling Bit is up to 14 times faster than competing drill bits on the market. In a recent test of 1" diameter bits, the SPEEDBOR "MAX" cut through a 1-1/2" Douglas Fir in 1.78 seconds - as apposed to 26.15 seconds from one of their competitors. As the leading producer of wood boring bits and accessories, IRWIN Industrial Tools has provided carpenters, plumbers, electricians, construction workers and DIYers elite performance through their SPEEDBOR line.
-
DeWALT Introduces Upgraded Compact 9.6V Cordless Drill/Driver
- ebuild (10/17/2006)
- DeWALT, a leading manufacturer of industrial power tools, announced the introduction of its 9.6V cordless drill/driver (DC750KA). This new compact drill/driver features more power, a rubber grip and a single sleeve ratcheting chuck providing the user with increased performance and versatility. The compact size also allows end users to access tight spaces. Designed for electricians, trim carpenters, woodworkers, HVAC professionals and installers, the DC750KA is ideal for drilling and fastening on multiple jobs.
- Tools
- REPLACEMENT CONTRACTOR Magazine (9/1/2006)
- Replacement Contractor Magazine staff picks the best new tools. Forrest Mfg. For precise miter cuts without the need for additional sanding, try Miter Master blades. Specially designed for perfect 45-degree cuts and 90-degree joints, the blades have side runout of +/- .001 to ensure smooth and even cutting. They are made of corrosion-resistant C-4 carbide and designed to fit single or double chop saws, table saws, and radial arm saws. Available with 80 or 100 teeth. 937.437.5236. www.forrestsawblades.com. (more)
-
18-Volt Dual Drill with Dual-Head Design and Dual Keyless Chucks
- BUILDING PRODUCTS Magazine (7/6/2006)
- The 18-volt dual drill acts as two tools in one with a revolving dual-head design and dual keyless chucks. Users can alternate between drilling and driving by flipping the dual head, so they don't have to carry a second tool, the firm says. The drill uses a nicad battery and has 1,700 milliamps of power. 800-640-6860.
- Tools
- REPLACEMENT CONTRACTOR Magazine (7/1/2006)
- Replacement Contractor Magazine staff picks the best new tools. Klein Tools. The Cushion-Grip magnetic-tip nut driver product line has expanded with the introduction of 11 magnetic nut drivers and two new seven-piece sets. The tools feature a doughnut-shaped magnet in the tip, allowing full engagement with the nut. Cushion-Grip handles offer greater torque and comfort. Hex sizes from 3/16 to 1/2 inches and shaft lengths from 1½ to 18 inches are now available. 800.553.4676. www.kleintools.com. (more)
- Tools & Equipment Review: Lithium-Ion Batteries
- BUILDING PRODUCTS Magazine (5/18/2006)
- Not surprisingly, most contractors are more concerned with a tool's productivity than the battery that drives it. But an emerging battery technology may cause them to reconsider their battery choices. Powerful, compact lithium-ion (LI) batteries are widely used in consumer electronics such as cell phones and laptop computers, and cordless power tool manufacturers have been interested in them for years. But only recently LI formulations were achieved to support high-amp-drawing power tools. And pros are taking notice.
- Tools
- REPLACEMENT CONTRACTOR Magazine (5/1/2006)
- Replacement Contractor Magazine staff picks the best new tools for the job.
- Power Platform
- REMODELING Magazine (2/1/2006)
- A tool's productivity is often of greater concern than the battery chemistry that drives it, but the Lithium-ion (Li-ion) battery platform merits closer consideration.
- Spotlight: Tools and Accessories
- BUILDING PRODUCTS Magazine (1/21/2006)
- Building Products Magazine staff pick the best new tools and accessories.
Subscribe to ebuild articles. Bring ebuild to you.
