Other Tools & Equipment Articles
Advertisement
Featured Articles
- Retailers Select HYDE Pivot Nozzle Wand for Award at National Hardware Show
- ebuild (6/28/2010)
- A panel of retailers recently selected Hyde Tools to receive a Retailers' Choice Award from the National Hardware Retail Association. Hyde was chosen because of the creative design and sales potential of the company's new line of HYDE Pivot Nozzle Wands for pressure washers.
- Work Gloves
- TOOLS OF THE TRADE Online (6/25/2010)
- Ergodyne's ProFlex 710 Trades Gloves are constructed of an Akton visco-elastic polymer made to dampen shock and impact. Abrasion-resistant textured PVC on the palm and fingers improves grip. Features include breathable three-layer stretch spandex with a neoprene knuckle pad, a terry thumb brow wipe, flex zones for comfort, and reinforced fingertips. Price: $25. 800-225-8238.
- Kneepads
- TOOLS OF THE TRADE Online (6/23/2010)
- BucketBoss's 95000 Kneepads weigh 2.3 pounds a pair and feature Gel-Dome technology. They're made with blown rubber and EVA and TPR for maximum shock resistance. They have a durable rubberized cap to protect surfaces from scratches, and they attach with a patented cross-hatched Velcro strap. Price: $70. 888-797-7855.
- Total Flex Articulating Kneepads
- TOOLS OF THE TRADE Online (6/23/2010)
- Tommyco Total Flex articulating kneepads 30321 have a patented all-terrain cover, making them ideal for exterior use, says the manufacturer. They feature a free-floating center and adjustable straps for positioning on the knee and are made from the company's Injected GEL and foam with a plastic shell. Price: $55. 800-563-3723.
- Intruder Protective Goggles
- TOOLS OF THE TRADE Online (6/23/2010)
- The US Safety Intruder goggles offer splash, dust, and impact protection and meet ANSI Z87.1 and CSA Z94.3 standards. They're made with abrasion-resistant polycarbonate lenses that incorporate anti-fog technology and are lined with soft, breathable foam for a good fit. Sold with a neoprene strap, they block 99.9 percent of UVA and UVB rays. Price: $12. 800-821-5218.
- Protective Glasses
- TOOLS OF THE TRADE Online (6/23/2010)
- Elvex Go-Specs GG-40C-FF protect against dust, sand, cement, and chemical particles, according to the manufacturer. The high-velocity-impact resistant polycarbonate lenses are 1.8 mm thick with a base 6 curvature and have an anti-fog coating. Go-Specs feature a polyurethane foam seal and angle-adjustable temples and offer 99.9 percent protection from UVA and UVB rays. Tested to ANSI Z87(+). Price: $9.50. 203-743-2488.
- Truck Bed Saddle Box
- REMODELING Magazine (6/16/2010)
- Designed to maximize visibility and enhance safety, the all-steel low-profile saddle box sits just above a truck's bed rail to keep rear sightlines intact. The box comes in two sizes to fit full-sized and compact pick-up trucks. The box features heavy-duty steel construction and a powder-coat finish in black or white. Crimp- and drill-free mounting brackets make installation easy. An Extreme Protection lock and full weather seal keep contents protected, and a weatherproof power cord pass-through allows for easy tool recharging. 800.456.7865.
- Milwaukee Introduces New 8 Piece Screwdriver Set
- ebuild (6/14/2010)
- Milwaukee Electric Tool Corporation introduces the 8 Piece Screwdriver Set as part of its new line of hand tools. Similar to the 11 in 1 Screwdriver that launched in April 2010, the new set features patented ECX bits to perfectly fit the hybrid specialty screws users often encounter in electrical boxes, conduit couplers, outlets, and other common job site fixtures.
- Snap Ring Pliers
- REMODELING Magazine (6/4/2010)
- When working with snap rings or retaining rings, Snap Ring Pliers offer versatility, functionality, and durability. Available with two tip styles in a variety of diameters from 0.035 to 0.126 inches, Snap Ring Pliers are forged from chrome vanadium electric steel designed to minimize tip breakage and offer extended tool life. Available in heavy duty or extra heavy duty models from the maker's Precision Series.
- Makita Delivers The Future Of Pneumatics With New High Pressure Compressor, Nailers
- ebuild (5/27/2010)
- The launch of Makita's new high pressure pneumatics consists of the 2.5 HP High Pressure AirCompressor (AC310H), the 2-1/2 High Pressure Siding Coil Nailer (AN610H), and the 3-1/2
Advertisement
Subscribe to ebuild articles. Bring ebuild to you.
