ebuild: The professional's guide to building products
Sign Up for Newsletter Email this to a friend

For Manufacturers

Browse Articles

Table Saws Articles

Featured Articles

  • Combination Miter/Table Saws
  • BUILDER Online (2/24/2008)
  • It's my understanding that combination miter/table saws like the Felisatti NTF 250 RI and NTF 250 RP have been available in Europe for many years, but they haven't found their way to American job sites because their makers figured the cost was too high for the U.S. market. Fortunately, this thinking has changed, and the two saws — which seem perfect for many trim carpentry and hardwood flooring projects — are now available in the U.S. Both can miter and bevel a 2x6, and the attached table saw can rip 2-by stock. The NTF 250 RI costs $845 and the NTF 250 RP (shown) costs $795. 800/626-9012.
  • Tile Saw
  • Journal of Light Construction (11/7/2007)
  • Most tile saws use a sliding table or a rail-mounted motor, both of which limit the size of tile that can be cut. Raimondi's 55-pound GS86 avoids such limitations because it's set up like a table saw. It has a built-in grinding wheel and a channel on the side for putting 45-degree bevels on tile edges. The whole rig comes in a sturdy plastic case not much bigger than a breadbox and costs about $1,500. 800/625-6686.
  • 10" Riving Knife Cabinet Saw with Granite Table Top Steel City Tool Works Unveils 10" Riving Knife Cabinet Saw with Granite Table Top
  • ebuild (10/9/2007)
  • Steel City proudly introduces their new 10" Riving Knife Cabinet Saws with GRANITE TABLE TOP (Models 35900G, 35905G, 35910G, 35915G). The ground breaking addition to the Steel City line machines perfectly flat, will not warp or change. It is not affected by heat, cold or humidity and will not rust like traditional cast iron table tops. The heavy duty stone top helps absorb vibration making the cut smooth and blade alignment accurate. It is also virtually maintenance-free.
  • 10-inch Portable Table SawTOTT Editor's Choice Award Winner: 10-inch Portable Table Saw
  • BUILDING PRODUCTS Magazine (8/15/2007)
  • Bosch. Whether they should or not, most contractors don't use blade guards for their table saw, which means a higher risk of injury. The 4100DG-09 10-inch portable table saw tackles this problem. Its Smart Guard system is modular and tool-free, so it's easier to remove and re-install a component. The see-through plastic blade guard's two-part split design allows each side to be raised independently. The saw also includes a digital readout rip fence, which allows for faster setup and greater precision, the company says. Cost: $679 (saw and Gravity Rise stand). 877-267-2499.
  • New Label in Diamond BladesSHOXX, a Strong New Label in Diamond Blades for Stone Cutting
  • ebuild (7/31/2007)
  • After six years of research and development, SHOXX technology reaches the diamond blades market. This worldwide patented innovation concerns a new segment production process that uses high-quality bonds developed in the automotive industry and now used for the first time in the diamond tool sector. Thanks to the strength of these bonds, the new SHOXX X20 disc cuts twice as fast as a standard blade and lasts twice as long as a top range blade.
  • Premier Fusion General-Purpose Saw BladeMVP Award Winner: Premier Fusion General-Purpose Saw Blade
  • BUILDING PRODUCTS Magazine (6/13/2007)
  • Freud America. Sometimes "general purpose" means doing many things, none of them very well. The Premier Fusion general-purpose saw blade, however, has been designed to cover the gamut from crosscuts and rips in hardwoods and softwoods to cuts in two-sided veneer and laminates. Not having to change blades "saves huge amounts of time," a judge noted. A double-grind tooth design helps the carbide blade cut smoothly so vibration is dampened. The nonstick coating prevents corrosion and gumming. The series features four sizes: 8-, 10-, 12-, and 14-inch. Cost: $99. 800-334-4107.
  • First Look
  • REMODELING Magazine (6/1/2007)
  • Remodeling Magazine staff picks the newest products for the remodeling market. Tamko. Combining the strength of steel with energy-saving technology, MetalWorks Cool Colors shingles offer aesthetics and performance for a wide range of applications. Manufactured to be long-lasting and offer a high solar reflectance, the product is rated by the Cool Roof Rating Council as having initial solar reflectance of up to 0.34 and initial thermal emmitance of up to 0.87. A variety of styles and colors are available. 800.641.4691. www.tamko.com. (MORE)
  • Bosch4100 Series 10-inch Portable Jobsite Table Saws
  • BUILDING PRODUCTS Magazine (5/16/2007)
  • Bosch. Three models of the 4100 series 10-inch portable jobsite table saws are available with new features. The 4100DG-09 has a Digital Rip Fence, modular Smart Guard System, and sub-base with handles. The other two models feature a SquareLock Rip Fence, a T-slot miter system, enhanced dust collection, a 40-tooth premium blade, and a wheeled stand. 877-267-2499.
  • Products: Tools
  • REPLACEMENT CONTRACTOR Magazine (5/1/2007)
  • The latest in tools.

rss icon

Subscribe to ebuild articles. Bring ebuild to you.