Tool Accessories Articles
Brought to you by
Featured Articles
- The SpeedCope
- REMODELING Magazine (11/11/2009)
- Accelerate the process of creating coped joints by using the SpeedCope, which provides a stable platform for woodworkers as they work with a power jig saw. Useful for high-volume production in the shop or on the jobsite, the SpeedCope mounts securely on bench tops or sawhorses, and features built-in clamps to hold work pieces in place. The sturdy base supports most jig saws, giving users plenty of control when cutting. The SpeedCope will accommodate molding up to 7 1/4 inches wide and adjusts easily for 45 and 90 degree inside miters, as well as chair molding, panel molding, and more. 800.279.4441.
- Laptop/Tool Bag
- ebuild (10/13/2009)
- For the multi-tasking contractor, the LT-XL tool bag holds a laptop computer along with paperwork and a variety of hand tools stored vertically in dozens of small pockets. Designed to be jobsite-tough, the bag is made with rugged PVC-impregnated denier body fabric and an injected-molded polypropylene base. The bag stands upright. 877-847-1443.
- New Jig Simplifies Cope Cuts for Easy Crown/Base Molding Installation
- ebuild (9/30/2009)
- Rockler Woodworking and Hardware is excited to introduce the SpeedCope, a new heavy-duty jig that helps make cope cuts for tight fitting overlapped joints in crown and base molding.
- Makita's New Jobsite Miter Saw Stand is Perfect Companion to Makita's Best-in-Class Miter Saws
- ebuild (9/9/2009)
- Makita U.S.A., Inc., manufacturer of high quality industrial power tools and accessories, is proud to announce the release of its new Jobsite Miter Saw Stand, model 195083-4. The new jobsite miter saw stand adjusts to five positions with a spring-loaded mechanism for quick and easy set ups in seconds.
- Milwaukee Introduces New M12 and M18 AC/DC Wall and Vehicle Chargers
- ebuild (9/8/2009)
- Milwaukee Electric Tool Corporation introduces the new M12 and M18 AC/DC Wall and Vehicle Chargers for Lithium-Ion batteries. Designed for the work day of the professional tradesman, the new chargers combine the functionality of a wall charger and vehicle charger into one unit to increase utility for the user.
- Milwaukee Introduces New Shockwave Impact Duty Accessories
- ebuild (8/24/2009)
- Milwaukee Electric Tool Corporation introduces over 80 new products in its new line of Shockwave Impact Duty accessories. Delivering high performance and functionality, the full range solution was designed to stand up to elevated and extreme torque applications. The line includes high performance drill bits, nut drivers, sockets, bit holders and adapters.
- PAM Collated Deck Screws Offer High Torque, No Waste Design To Eliminate Common Problems
- ebuild (8/24/2009)
- Pam Fastening Technology offers a line of PamFast Magni-coated collated composite deck screws that when used with the Pam Auto Feed system eliminate many common problems and reduced the time required for installation. In addition, the resulting deck has a more consistent countersink for all the screws meaning a cleaner, more attractive deck surface every time.
- Material Mover
- ebuild (8/20/2009)
- The FastCap Handle-On-Demand attaches to building materials--such as countertops, cabinets, sheet metal, or glass--to assist contractors with lifting, moving, and maneuvering. The device, which can be used on any flat, non-porous surface, is available for loads up to 50 pounds or up to 200 pounds. 800-505-8888.
- Snap-Back Arbors
- ebuild (8/20/2009)
- The drive-off pins in the Snap-Back Arbors allow for easy attachment to and detachment from the saw without adapters, the company says, while also preventing the arbor from tightening on the saw during use and causing stripping. Because the sleeve does not need to be held back to engage and disengage the arbor and does not need secondary tightening, hole saws can be switched out more quickly. 800-628-8810.
- PAM Collated Deck Screws Offer High Torque, No Waste Design To Eliminate Common Problems
- ebuild (8/13/2009)
- PAM Fastening Technology offers a line of PAMFAST Magni-coated collated composite deck screws that when used with the PAM Auto Feed system eliminate many common problems and reduced the time required for installation. In addition, the resulting deck has a more consistent countersink for all the screws meaning a cleaner, more attractive deck surface every time.
Subscribe to ebuild articles. Bring ebuild to you.
