ebuild: The professional's guide to building products
Sign Up for NewsletterEmail this to a friend

Marketplace

Back to: Home / Articles

Tools & Equipment Articles

Featured Articles

  • Hitachi Power Tools Introduces a Gas Powered 18-Gauge Finish Nailer its Cordless Lineup
  • ebuild (8/24/2009)
  • Hitachi Power Tools today announced the introduction of a new two-inch gas powered 18-Gauge finish nailer, the NT50GS. A combination of lithium ion battery technology and a gas fuel cell offers the convenience of a cordless tool with the power of pneumatic! Lightweight and loaded with features for performance, user comfort, and safety, this nailer is ideal for a variety of applications including molding installation, cabinet assembly, wainscoting, chair rail, window and door casing, and decorative trim.
  • Jobsite Material Recycler
  • ebuild (8/20/2009)
  • The Hog Crusher scoops up and pulverizes most jobsite materials--including brick, block, stone, asphalt, and non-reinforced concrete--into 2-inch pieces or smaller that can be used as backfill, landfill, or driveway material rather than having to be hauled away. The device attaches to a skid-steer loader or forklift. It has a 1/2-yard hopper capacity and can process up to 10 tons of material per hour, the firm says. 800-421-1244.
  • Material Mover
  • ebuild (8/20/2009)
  • The FastCap Handle-On-Demand attaches to building materials--such as countertops, cabinets, sheet metal, or glass--to assist contractors with lifting, moving, and maneuvering. The device, which can be used on any flat, non-porous surface, is available for loads up to 50 pounds or up to 200 pounds. 800-505-8888.
  • Circle-Cutting Masonry Blade
  • ebuild (8/20/2009)
  • The drive-off pins in the Snap-Back Arbors allow for easy attachment to and detachment from the saw without adapters, the company says, while also preventing the arbor from tightening on the saw during use and causing stripping. Because the sleeve does not need to be held back to engage and disengage the arbor and does not need secondary tightening, hole saws can be switched out more quickly. 800-628-8810.
  • Snap-Back Arbors
  • ebuild (8/20/2009)
  • The drive-off pins in the Snap-Back Arbors allow for easy attachment to and detachment from the saw without adapters, the company says, while also preventing the arbor from tightening on the saw during use and causing stripping. Because the sleeve does not need to be held back to engage and disengage the arbor and does not need secondary tightening, hole saws can be switched out more quickly. 800-628-8810.
  • Super Tool 300
  • ebuild (8/20/2009)
  • New and upgraded features on the Super Tool 300 include bigger, stronger pliers with a sloped neck for further reach in tight spaces, the ability to remove regular/hard-wire cutters for sharpening or replacement, and Edge-safety Clumping that allows the user to pull out tools without automatically pulling out the knife implements. The ST300 also includes rounded handles, a hollow-ground straight blade for easy sharpening, and side cut-outs for easy access when wearing work gloves. 800-847-8665.
  • Roofing Nailer
  • ebuild (8/20/2009)
  • The latest tool in the Full Force Technology lineup is the RN175 roofing nailer, which boasts a compact, balanced profile and a 10 percent power increase because of its efficient air chamber design, the company says. The tool features a single-action side-loading nail canister that provides for faster reloading, an aluminum main housing and wear plates on the tool body and nail canister, protective carbide inserts on the front and bottom of the nosepiece, tool-free adjustable shingle guide and tool-free depth-of-drive, and dry-fire lockout. It accommodates nails from 3/4 inch to 1 3/4 inches long. 877-267-2499.
  • PAM Collated Deck Screws Offer High Torque, No Waste Design To Eliminate Common Problems
  • ebuild (8/13/2009)
  • PAM Fastening Technology offers a line of PAMFAST Magni-coated collated composite deck screws that when used with the PAM Auto Feed system eliminate many common problems and reduced the time required for installation. In addition, the resulting deck has a more consistent countersink for all the screws meaning a cleaner, more attractive deck surface every time.
  • Impact Ready Drill Bits
  • ebuild (8/4/2009)
  • Specifically engineered for impact drivers, Impact Ready drill bits are five times more durable than conventional hex-shank drill bits, allowing them to withstand high levels of torque and last longer, the maker says. The bits' one-piece shank design helps reduce bit breakage, a tapered web design provides added strength, and a pilot-point tip allows the bit to begin drilling more quickly, thus speeding up drilling time and reducing burrs. 800-433-9258.
  • Lithium-Ion Cordless Spiral Saws
  • ebuild (8/4/2009)
  • The CR18L is one of the only 30,000-rpm lithium-ion cordless spiral saws on the market, according to the firm. Weighing 2.8 pounds, the 18-volt tool has a slim profile, a 20 percent higher power-to-weight ratio than similar tools, and a non-marring depth guide, the maker says. It will cut a variety of materials, such as wood, tile, drywall, underlayment, and laminate. The tool also has a built-in LED information display. 877-768-6947.

rss icon

Subscribe to ebuild articles. Bring ebuild to you.