ebuild: The professional's guide to building products
Sign Up for NewsletterEmail this to a friend

Marketplace

Back to: Home / Articles

Tools & Equipment Articles

Featured Articles

  • Laser Distance MetersLaser Distance Meters
  • BUILDING PRODUCTS Magazine (6/1/2009)
  • Equipped with a digital point-finder, high-resolution 2.4-inch color display, and a tilt sensor, Disto D5 hand-held laser distance meters let users make precise measurements of angles and horizontal distances. The digital point-finder allows for a 4x zoom so users can easily point to far-off objects, even in bright sunlight, and get accurate measurements. The ability to measure true horizontal distances is beneficial when the laser can't be pointed directly at the object due to obstacles in the line of sight. Additional details about a measurement, such as room dimensions, are available at the touch of a button. 800-452-7377.
  • Compressors/Generators
  • BUILDING PRODUCTS Magazine (6/1/2009)
  • The company has introduced two compressor/generator combination models that provides portable air and a power source all in one. Powered by an 11-hp Honda GX series OHV engine, the K11HGA features the company's "K" pump, a single-stage cast-iron compressor pump. The engine has an electric start and produces 8.9 CFM at 100 PSI or 8.6 CFM at 125 PSI. The G13HGA uses a "G" pump and a 13-hp, electric-start Honda GX engine, boasts 16.2 CFM at 100 PSI or 15.6 CFM at 125 PSI. Each product features a 3,000-watt generator for powering electric tools, lighting, or other jobsite equipment. The models can also act as a backup power source during power failure, the company says. 814-445-3400.
  • Generac Power Systems Launches New Portable Series
  • ebuild (5/27/2009)
  • To respond to the growing demand for reliable, standby, portable power, the leader in standby power generation, Generac Power Systems, Inc., Waukesha, Wis., has introduced the new XG Series of portable generators. Compact in design, this new Series is the perfect back-up power solution in the home or on the job-site.
  • Multipurpose Faucet and Sink Installer
  • BUILDING PRODUCTS Magazine (5/27/2009)
  • The open slot design of the Multipurpose Faucet and Sink Installer allows it to be used over water supply lines, so mounting nuts can be tightened or removed without disconnecting supply lines. Aluminum accessories include a shut-off valve attachment to turn hard-to-reach angle stops without marring the chrome. A hex socket attachment fits 3/4- and 1-inch hex nuts and plastic supply-line nuts, and a strainer basket attachment holds drain units in place while tightening the mounting nut. 888-743-4333.
  • The Extractor
  • BUILDING PRODUCTS Magazine (5/21/2009)
  • The Extractor delivers slip-free extraction, making it easier to remove exposed nails and fasteners encountered during building, remodeling, repair, and salvage projects, according to the manufacturer. The tool's self-locking jaws automatically increase gripping force as greater resistance is encountered. Once the extraction has been initiated, only a prying action is necessary; the handles no longer need to be squeezed. 843-556-0455.
  • Carbide Hole Saws
  • BUILDING PRODUCTS Magazine (5/21/2009)
  • These carbide hole saws cut through wood, ceramic tile, brick, cinder block, cement board, fiber-cement board, and plastic. They feature diamond-ground carbide teeth and clearance slots for chip and dust removal. The saw kits come with 19 cups ranging from 1 inch to 41/8 inches. Two sets are available for multiple cutting applications and each comes with two carbide-tipped pilot bits and a quick-change mandrel. 877-267-2499.
  • Hole Enlarger Kit
  • BUILDING PRODUCTS Magazine (5/21/2009)
  • The Hole Enlarger Kit fixes holes that are cut too small or widens old holes that won't fit larger materials. Users enlarge holes by attaching a hole saw, which matches the desired hole size, to an enlarger nut, then attaching a cup matching the original hole size. The inner cup acts as a pilot guide, allowing the outer cup to cut a clean hole. Two thread profiles accommodate cup sizes from 9/16 inch to 6 inches. 877-267-2499.
  • ProSite Combination Protractor
  • BUILDING PRODUCTS Magazine (5/20/2009)
  • The ProSite CP505A-12 Combination Protractor provides fast readings for miter cuts, single cuts, compound cuts (with conversions for cutting crown molding), exact and supplemental angles, and roof-pitch references. Constructed of lightweight aluminum, the tool has scissor-action legs and easy-to-read, laser-engraved dial scales. It eliminates mathematical calculations and guesswork, the maker says. 800-541-8887.
  • Tough Scraper Adds Power to Hyde's Wire Brushes
  • ebuild (5/20/2009)
  • Scraping paint and pulling up flooring is tough work and these dual action scraper/brushes will save you time and effort. The ergonomic soft-grip handle maximizes your grip and eliminates pressure points, reducing user fatigue. And now there is no need to scramble for a separate scraper on the job because the durable steel carbon blade is right there on the brush when you need it.
  • Work Pants
  • BUILDING PRODUCTS Magazine (5/20/2009)
  • The maker's line of work pants offers an array of features to keep each of five styles in top shape, even after heavy use. Reinforced utility pockets are easily accessible, even when squatting or kneeling, and have angled corners to keep screws and nails from getting stuck. Lightweight kneepad pockets with foam or gel inserts provide all-day comfort without constricting straps. A webbed hammer loop and detachable screwdriver pocket make tool access easy. 866-248-5452.

rss icon

Subscribe to ebuild articles. Bring ebuild to you.