Contractors can save valuable time installing conduit, pipe and cable runs with the new Fly-Trip Clip from Powers Fasteners, Inc. It is the latest Stick-E™ accessory for the Powers Trak-It® gas-fastening tool, and the clip's adjustable grip makes installation a snap. You merely place the clip on the nose of the Powers C3-ST tool, press the clip against the wall and shoot. Then position the conduit, pipe or cable run between two or more clips and snap the clips shut. Powers' unique Stick-E technology holds the clip firmly in place for a complete hands-free operation, and the Fly-Trip firmly secures the conduit, pipe or cable run in place.

The Fly-Trap Clip is available in three size ranges - 1/2" to 1-1/4", 1/2" to 3/4" and 5/8" to 3/4" - which eliminates the aggravation of fumbling through countless unique sized clips.

There is an extensive variety of Stick-E clips, washers and other mounting accessories that feature a pre-assembled clear plastic locating washer. The breakaway washer enables the Stick-E accessory to be stuck directly into the head of a Powers Trak-It tool by hand and holds the accessory securely in place until the tool is fired. There is no need for a probe or installation tool.

Powers Fasteners offers an extensive line of mechanical and adhesive anchors; roofing fasteners; gas-firing tools, and powder actuated fastening systems serving professional construction and plant maintenance markets. The company has manufacturing facilities in Michigan, Indianapolis and Chicago, along with 28 regional sales locations throughout the United States.

For more information, visit Powers' website at www.powers.com.

POWERS FASTENERS, INC.
2 Powers Lane
Brewster, NY 10509

Contact: Michael Isser
Isser & Associates, Inc.
3141 Lee Place
Bellmore, NY 11710
(516) 781-0180
FAX: (516) 781-3761
e-mail: info@isserpr.com