Shower Modules


    Shower Modules

    Shower Modules


    Shower Modules

    Shower modules - also known in lay terms as shower stalls, make it simple to create a stylish, easy-care shower in short order. Shower modules can are installed as one, two, three, or multi-piece units. The Shower modules category on ebuild lists molded units in many sizes and colors made from acrylic, fiberglass, fiberglass reinforced polyester and gel-coat.

    Use the ebuild Specifier to narrow down your search and find a shower module that fits your project requirements. You may choose from listed manufacturers, including:

    You may also select values for key specifications to narrow your choices among available shower stalls and shower modules:

    Overall Length indicates the measurement of the longest horizontal side of the product, expressed in inches.

    Generic Color refers to a set of common color names assigned by ebuild to represent the complete spectrum of colors and color names designated by the manufacturers to products within a category.

    Installation Type refers to the position and configuration of the product within the room with regards to elevation, isolation, and relation to the walls, e.g., neo-angle, alcove, etc.

    Overall Height indicates the measurement of the longest vertical side (top to bottom) of the product, expressed in inches.

    Overall Width indicates the measurement of the shortest horizontal side of the product, expressed in inches.

    Material refers to the substance from which the unit is fabricated, e.g.,acrylic plastic, fiber-reinforced plastic, gelcoat, etc.

    Configuration refers to the number of sections out of which the final unit is to be assembled, e.g., 1-piece, 2-piece, etc.