Two-Ply econoKORE MDF Bending PanelsLower Cost and Greater Stability than Competing Single-Ply Kerfed and Plain Kerfed MDF Bending Panels

November 8, 2007 - The Kerfkore Company now offers econoKORE, this USA bendable substrate manufacturing pioneer's two-ply answer to single ply kerfed and plain kerfed MDF panels. It offers far greater stability with its smooth surface and two vs. one ply and enables the user to form curves with less labor and at a lower cost.

econoKORE's unique 2-ply construction offers a more stable and balanced panel that is calibrated for consistent size and thickness. It can be easily bent and attached to a ribbed frame by the use of nails. There is no warping, twisting, flat spots, size variation, or odor associated with econoKORE.

econoKORE MDF Bending Panels

econoKORE enables the user to form curves with less labor and at a lower cost.

It is much easier to work with and more economical to use than sing-ply kerfed and plain kerfed MDF panels and can reach a 6-inch radius. Installation can be accomplished with traditional fabricating tools and methods, and it is manufactured from processed MDF core with a high density or poplar plywood overlay. There is no sanding or patching required and the poplar plywood overlay provides a smoother, more symmetrical laminating or painting surface.

econoKORE is available in a 1/4" and 3/8" thickness along with a recently introduced 3/4" lite version with an MDF core in 4'x8' and 8'x4' panel sizes. The 1/4", 3/8", and 3/4" thickness are available with a poplar plywood face while the 1/4" and 3/8" are available with a high-density fiberboard face. The board weighs just 1.0 pound per square foot.

For further information, contact:
The Kerfkore Company (a division of Interior Products, Inc.)
2630 Sidney Lanier Drive
Brunswick, GA 31525
800-637-3539 or 912-264-6496
Fax: 912-262-9763
info@kerfkore.com
www.kerfkore.com