ebuild: The professional's guide to building products

Marketplace

For Manufacturers

Source Product Categories

Indoor Gas-burning Fireplaces

Heatilator

Caliber nXt 42 in. Model CNXT90 Direct-vent Gas Fireplace--Spark to Pilot Ignition

ebuild Ref. No. CNXT90IT
Suggested Retail Price $2,615
Retail Price Information
List Price Notice

Where prices are shown, they are based on the best information available to ebuild and generally refer to manufacturer's suggested retail prices. They should be used for reference only. In some instances, the list price refers to the lowest-cost version of an item that may be available in a variety of colors, finishes, sizes -- or upgraded features. Check with local distributors for actual prices.

False

Features and Benefits

  • 28,000 to 45,000 Btus/input per hour
  • AFUE heater ef?ciency of 67%--steady state ef?ciency of 70%
  • Choice of three unique front faces to create just the right look
  • Dashboard Control Panel assures the ultimate in convenience and performance
  • Featuring the New Extreme Technology of Genesis Flame
  • Limited lifetime warranty
  • Optional Heat Zones available to route some heat into two separate rooms of the home
  • Sealed combustion chamber uses only outside air for combustion, helping to preserve indoor air quality and prevent negative air pressure problems
  • The perfect ?replace choice for that semi-custom home
  • Top or rear direct vent allows installation along interior or exterior walls, below grade, or in corners
  • UL tested and listed

Product Specifications

Manufacturer Model No. CNXT90
Product Name Caliber nXt Direct Vent Gas Fireplace
Width 47 in.
Height 38 in.
Depth 23 in.
Rough Opening Width 48 1/4 in.
Rough Opening Height 38 3/4 in.
Rough Opening Depth 23 1/2 in.
Viewing Area 42 in. x 32 in.
Design Type Front-view
Venting Type Direct-vent
Energy Type Natural gas
Heating Method Heat-circulating
Venting Configuration
  • Rear vent
  • Top vent
Btu/h (Max.) 45000
Heater Rated Yes
Interior Lining Type Traditional refractory
Ignition Type Spark to pilot
Warranty Period Limited lifetime warranty
Meets Standards
  • UL tested and listed
Additional Parts Required/Recommended
  • A hearth extension is not required
  • Certified for installation in bedrooms, bed/sitting rooms and mobile homes
  • Consult local building codes for local installation and operational guidelines
  • For best results, do not construct the framing until the unit is in place
  • The black metal may be completely covered with noncombustible material only, such as marble, tile, stone, etc.
  • The rough framing dimensions shown represent the distance from stud to stud only and do not take into consideration the addition of sheetrock/drywall
  • When finishing the Caliber nXt, combustible material may be brought up to the sides of the fireplace but must never overlap the black area
  • Wiring for fan kit or optional remote control (120V) must be done prior to finishing the installation

Product Resources

Downloads