ebuild: The professional's guide to building products
Advertisement
Advertisement
Advertisement

Source Product Categories

Advertisement
Advertisement

Single-Ply Roofing Systems

Johns Manville Roofing Fully Adhered PVC Single Ply Roofing System for use over Johns Manville (JM) approved decks, or other approved insulation on inclines of up to 6 in. per foot with Solvent Based Adhesive and inclines of 2 in. per foot with Latex based adhesive

Johns Manville Roofing

Fully Adhered PVC Single Ply Roofing System for use over Johns Manville (JM) approved decks, or other approved insulation on inclines of up to 6 in. per foot with Solvent Based Adhesive and inclines of 2 in. per foot with Latex based adhesive

ebuild Ref. No. SP6RA
Retail Price Information
List Price Notice

Where prices are shown, they are based on the best information available to ebuild at the time the product information was received and may not be current,and generally refer to manufacturer's suggested retail prices. They should be used for reference only. In some instances, the list price refers to the lowest-cost version of an item that may be available in a variety of colors, finishes, sizes -- or upgraded features. Check with local distributors for actual prices.

Product Specifications

Manufacturer Model No.SP6RA
Membrane TypePVC (polyvinyl chloride)
Membrane Thickness0.06 in.
Method of AttachmentFully Adhered
Required Substrate/Deck TypeInsulated/non-nailable
Required SurfacingSmooth asphalt-based coating
Recommended Roof Slope per Foot6 in.
Approximate Installed Weight per 100 sq ft
  • 38 lb
  • 40 lb
Additional Parts Required/Recommended
  • PVC Membrane 105 sq ft per 100 sq ft of Roof Area
  • PVC Membrane Adhesive Solvent Based per 100 sq ft of Roof Area 5 gal. per 100 sq ft of Roof Area
  • PVC Membrane Adhesive Latex Based per 100 sq ft of Roof Area 1.4 -1.85 gal. per 100 sq ft of Roof Area

Product Resources

Downloads