ebuild: The professional's guide to building products
Advertisement
Advertisement
Advertisement

Source Product Categories

Advertisement
Advertisement

Fiberglass Windows--Single Units

Integrity by Marvin Integrity® Venting Glider Window--35 1/2 in. x 35 3/4 in.

Integrity by Marvin

Integrity® Venting Glider Window--35 1/2 in. x 35 3/4 in.

ebuild Ref. No. IGL3636
Retail Price Information
List Price Notice

Where prices are shown, they are based on the best information available to ebuild at the time the product information was received and may not be current,and generally refer to manufacturer's suggested retail prices. They should be used for reference only. In some instances, the list price refers to the lowest-cost version of an item that may be available in a variety of colors, finishes, sizes -- or upgraded features. Check with local distributors for actual prices.

Features and Benefits

  • Almond Frost or White sash lock hardware seals weatherstripping against the frame as well as offering security
  • Fixed sash is tightly sealed to prevent air or water infiltration
  • Our remarkable tilt latch makes removal and reinstallation of the operating sash easy.
  • Triple-sash units replicate the broad view of a picture window assembly, with two operating sash that are easy to remove and clean.
  • Would you install a garage door on its side and expect the same performance? Our specially designed weather-stripping and jamb is specifically made to perform in a glider, sealing closed sash tightly against the elements.
  • Some companies treat their sliding windows as a double hung on its side, compromising the energy performance and shortening the operating life of the window.
  • The glider has all the excellent features you'd expect from an Integrity® window: Ultrex® cladding, easy installation and reliable performance and operation.
  • If there's no room for a swinging sash, the glider will fit right in, closely matching casement proportions and sight lines.

Product Specifications

Manufacturer Model No.IGL3636
Window FormatSlider
ShapeRectangle
Overall Width35 1/2 in.
Rough Opening Width36 1/2 in.
Overall Height35 3/4 in.
Rough Opening Height36 1/4 in.
Masonry Opening Width36 in.
Masonry Opening Height36 in.
Jamb Depth4 9/16 in.
U-Value0.31
Standard GlazingDouble--Low-E/gas fill
Special Glazing OptionsTempered Low E II with Argon gas
Divided Lite OptionsRemovable grilles
Exterior Color
  • Pebble Gray
  • Stone White
Interior Frame Color/Finish
  • Bare wood
  • White
Wood Species (Interior)Pine
Weatherstripping
  • Full perimeter frame weatherstrip
  • Sash is sealed to the jambs and header using a flexible bulb gasket
  • Sill is sealed to the sash using a fin weatherstrip
  • Meeting stiles are sealed using a flexible bulb gasket
Hardware OptionsAvailable in Almond Frost and White
Meets Standards
  • WDMAI.S.4
  • ANSI
  • AAMA
  • WDMA 101/ I.S. 2-97
  • WDMA H-LC30
  • WDMA F-C30
  • Federal Specifications DD-F-451D
  • ASTM C 1036-85
  • ASTM E 772-92
  • IGCC certified
Parts Included
  • Meeting stile lock and keeper
  • Spring loaded tilt latches
  • Factory applied folding nailing fin and drip cap systemHalf screen with Stone White or Pebble Gray aluminum frame
  • 4/4 clear pine interior frame liner
Additional Parts Required/Recommended
  • 6 9/16 in. and 6 13/16 in. jamb extension
  • Masonry brackets
  • Field mulling kit

Product Resources

Downloads