ebuild: The professional's guide to building products
Advertisement
Advertisement
eBuild Catalog Viewer View all catalogs

Rehau Radiant Heating Systems

of 61
10 6. PR o b A l AN c E Acc ESS o RIES AND R EP l A c EMENT P ARTS Note: Unless otherwise noted any of these accessories can be used on either the PRO BALANCE or HLV brass heating manifolds (not for PRO BALANCE XL).PRO BALANCE RAUPEX Connections for Brass Manifolds Package Quantity Unit Weight Article # Description Bag Box Ctn gm lb 267507 3/8" RAUPEX x R 20 Brass Manifold Outlet 2 50 300 76 0.17 261007 1/2" RAUPEX x R 20 Brass Manifold Outlet 2 50 300 73 0.16 267557 5/8" RAUPEX x R 20 Brass Manifold Outlet 2 50 300 73 0.16 267007 3/4" RAUPEX x R 20 Brass Manifold Outlet 2 24 144 132 0.29 For use with PRO BALANCE and HLV brass manifolds. 3/8", 1/2" and 5/8" fittings include insert with O ring, split brass ring and compression nut. 3/4" fitting includes R 20 x 1" bushing, 3/4" insert with O ring, split brass ring and compression nut.PRO BALANCE Flow Stop Circuit Valve Package Unit Weight Article # Description Quantity kg lb 250224 PRO BALANCE Flow Stop Circuit Valve 5 0.12 0.26 This brass 1/4 turn ball valve attaches to R 20 circuit outlets on the supply side of PRO BALANCE manifolds to allow for complete shut off. Standard 1/4" vent key (supplied with each manifold) is used to operate the valve. Install flow stop valves by hand onto R 20 outlets of the PRO BALANCE manifold. Do not use pipe dope or thread sealant. Thread the valve clockwise until it stops. If necessary, back the valve off to align the valve stem with the front of the manifold. No tightening with a wrench is necessary, as the integral O ring makes the seal.PRO BALANCE Manifold Extension Kit Package Unit Weight Article # Description Quantity kg lb 250225 Extension Kit for PRO BALANCE Manifolds 1 1.0 2.2 Used to add a circuit to an existing PRO BALANCE manifold. The extension kit includes a supply section with a visual flow gauge, a return section with a circuit balancing/isolation valve, and two gaskets.PRO BALANCE Flow Setter Valves Package Unit Weight Article # Description Quantity gm lb 244807 001 1/2 4 GPM PRO BALANCE Flow Setter Valve 1 760 1.67 244817 001 1 9 GPM PRO BALANCE Flow Setter Valve 1 760 1.67 PRO BALANCE flow setter valves are used to set flow to PRO BALANCE and HLV manifolds and can be installed in line into any pipe feeding a manifold. This is ideal when multiple manifolds are fed from a single circulator and flow needs to be set correctly to each. PRO BALANCE flow setter valves are also used in variable speed injection pump mixing systems to set the flow through the injection loop. PRO BALANCE flow setter valves are supplied with two gaskets and adapters converting to 1" MPT.
Rehau Rehau Radiant Heating Systems_2007_9